Tissue Paper Decals

001FBL
001FBL
002FBL
002FBL
003FBL
003FBL
004FBL
004FBL
005FDB
005FDB
006FDB
006FDB
007FDB
007FDB
008FLB
008FLB
009FLB
009FLB
010FDB
010FDB
011FLB
011FLB
012FLB
012FLB
013FLB
013FLB
014FLB
014FLB
015FDB
015FDB
016FLB
016FLB
017FLB
017FLB
018FLB
018FLB
019FDB
019FDB
020FLB
020FLB
021FLB
021FLB
022FLB
022FLB
023FLB
023FLB
024FLB
024FLB
025FLB
025FLB
026FDB
026FDB
027FLB
027FLB
028FLB
028FLB
029FLB
029FLB
030FLB
030FLB
031FLB
031FLB
032FGR
032FGR
033FBK
033FBK
034FBK
034FBK
035FGR
035FGR
036FGR
036FGR
037FAQ
037FAQ
038FLB
038FLB
039FLB
039FLB
040FDB
040FDB
041FDB
041FDB
042FBL
042FBL
043QBL
043QBL
044QBL
044QBL
045QBL
045QBL
046QBL
046QBL
047QBL
047QBL
048QBL
048QBL
049QBL
049QBL
050QBL
050QBL
051QBL
051QBL
052QBL
052QBL
053QBL
053QBL
054QBL
054QBL
055FBL
055FBL
056FBL
056FBL
057QBL
057QBL
058QBL
058QBL
059FBL
059FBL
060QBL
060QBL
61QDB
61QDB
062QBL
062QBL
063FBL
063FBL
064QDB
064QDB
065FBL
065FBL
066FDB
066FDB
067QDB
067QDB
068QLB
068QLB
069QDB
069QDB
070QDB
070QDB
071QLB
071QLB
072FBL
072FBL
073QBL
073QBL
074FBL
074FBL
099QRE
099QRE

The underglazes tissue paper decals are available in one or more colors and sizes. There are many other designs available, but too many to list here. Custom designs are also available for minimal additional cost. These decals are suitable for use on both greenware and bisque and they make decorating both flat and curved surfaces a breeze!

Contact us to get the latest available designs or tell us what themes or designs you would like and we will send you relevant pictures to look at to select from.

The size of decal sheets is 37 cm x 51 cm. The decals are identified by code as follows:

nnnFCO where:

nnn – 000 – 999 number of design; F – “F” full sheet, “Q” quarter sheet; CO – Color, “RE” Red; “DB” Dark Blue; “BK” Black; “OR” Orange; “GR” Green; “YE” Yellow;  “PI” Pink; “LB” Light Blue; “BL” Blue; “AQ” Aqua; etc

 

Using Underglaze Decals:

The underglaze decals can be applied to fresh, leather hard, bone dry and bisque fired clay with slightly varying effects. To use the underglaze decals, place the tissue transfer face down on the clay or bisque and gently brush the back with a moist brush or soft sponge. Leave the underglaze decal in place for a couple of minutes before carefully peeling it off the clay. The pattern from the underglaze decal should remain on the clay surface. Once the applied pattern has dried on the clay, underglaze and/or 3D Trailing glaze may be used over the pattern. Best results are obtained when the underglaze decal papers are used on flat surfaces, however they can be applied to a variety of shapes by simply cutting the sheets into strips or smaller tiles and applying them in a mosaic-like manner.